Major Contributions
 

1. Pioneered a scalable tape-casting and hot-pressing strategy to fabricate thin-flake Li₀.₃₄La₀.₅₆TiO₃ (LLTO) solid-state electrolytes with controllable thicknesses of 50–200 µm, high relative density and mechanical strength.

2. Showed that electrolyte thickness governs lithium content, phase stability, ionic conductivity and interfacial resistance; a two-layer LLTO balances short Li⁺ diffusion paths with lithium retention, reaching ~1.5 × 10⁻³ S cm⁻¹.

3. Li//Li cells cycle stably for over 1000 h and Li//Cu cells reach 99% Coulombic efficiency over 500 cycles; Li–S cells deliver 1173 mAh g⁻¹ for 200 cycles, and 3 mg cm⁻² sulfur cathodes reach 3 mAh cm⁻².

主要貢獻
 

1. 首創以刮刀成型搭配熱壓的可量產製程，製備厚度可控（50–200 µm）、高相對密度與高機械強度的薄片 Li₀.₃₄La₀.₅₆TiO₃（LLTO）固態電解質。

2. 證明電解質厚度決定鋰含量、相穩定性、離子導電度與界面阻抗；兩層 LLTO 兼顧短 Li⁺ 擴散路徑與足夠的鋰保留，離子導電度約 1.5 × 10⁻³ S cm⁻¹。

3. Li//Li 對稱電池穩定循環超過 1000 小時，Li//Cu 半電池 500 圈庫倫效率 99%；鋰硫全電池最高容量 1173 mAh g⁻¹、壽命 200 圈，硫載量 3 mg cm⁻² 時面積容量達 3 mAh cm⁻²。